TSM1500 24v Charger (CAN Enabled)

$475.00
In stock
+

This 24 volt canbus enabled charger has a peak output of 40 amps, and requires an EVCC or MCU (charge controller) to function.

For quicker charging, these can be wired in parallel. Input and output wire size must be rated for system current. Cooling fins and fan must have adequate clearance for cooling. Includes all connectors and remote charge indicator.

  • Up to 1500 Watts output, 110 or 220v AC Input
  • 11" x 7" footprint and 8 pounds
  • Water Resistant to IP66 standards
  • Draws <15 amps from the AC input

** Tech support is not available for connection issues between your own canbus equipment and the TSM charger. **

TSM1500 dimensions

 

 

Specifications Units TSM 1500
Output power (>185VAC) Watts 1500
Output power (<185VAC) Watts 1000
Dimensions (LxWxH) Inches 11 x 7 x 3.5
Input voltage range VAC 90 - 260
Efficiency @3000W % >=93%
Working temperature range deg C -25 to 55
Canbus baudrate kbps 250
Environmental protection   IP66
AC Input wire gauge AWG 14
DC Output wire gauge AWG 10
Assessory 12V out voltage Volts ~12.2
Accessory 12v out max current Amps 5.0
Accessory interlock circuit max current Amps 1.0

 

Charging Specifications
INPUT VOLTAGE MAX OUTPUT POWER OUTPUT VOLTAGE MAX OUTPUT CURRENT
TSM1500 24V (Nominal)  
220Vac
 
1.5 kW 8-20V 25A
20-35V 40A
110Vac 
 
1 kW 8-20V 25A
20-35V 40A (MAX POWER 1KW)

 

Included Components

  • TSM1500 24v Charger
  • Connectors with terminal pins:
    • Anderson SB50 for DC Output
    • AC input connector
    • Canbus connector
    • 12v output connector
  • Charge Indicator Light with connector
  • Charge Connector Diagram