Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK





Thunderstruck Motors 96V Isolated DC-DC converter has 13.8V output with a max of 50 amps (burst at 12V).  Allowable Input is 72-135v. 8"x5.5" Footprint. 3 lbs. 


Yellow 96V B+

Grey  96V B-

Green 96V B+ (On)


Red 12V +

Black 12V-

Do not connect black to grey.


The ipDCIS series isolated DC-DC converter utilizes advanced high frequency power conversion technology and is designed to transfer high power battery voltage to a lower 12V, to supply vehicle mounted devices such as lights and audio systems. Its features include small size, high efficiency, stabilized output voltage, and completely protected functionality.

This DC-DC converter is completely electrical isolated from input to output to ensure safe use; stabilized output voltage can charge 12V batteries; multiple DC-DC converters can be used in parallel directly to increase output current.

Maximum Efficiency:        ≥88%

Environmental Enclosure:     IP65

Operating Temperature:       -20℃-+60℃

 Protections & Functions

Water & vibration Resistant:  Enclosure is sealed by silica glue to protect from water and vibration.

Key Switch Control:       The converter can be controlled by a key switch control wire instead of an input relay.                                     

Over Heat Protection:      Automatically reduces output current if the temperature is over 65°C, but it does not shut down to

                                            ensure the continuous power for your accessories.

Short Circuit Protection:    Shuts down and auto-resets with little pulse current.

Under Voltage Protection:   Shuts down when the voltage of Hi-V battery is too low to avoid over-discharge of

                                                 the battery.

Output Voltage: 13.8V±0.2V @0A, >12V @50A

Allowable Input: 72-135v

Low Voltage Cutoff 


(1) Be sure you don't have input wires and output wires reversed, otherwise it will cause damage!

(2) Don't open the shell of the converter; there is a risk of electric shock!

Mechanical Drawing