The TC HK-J series 3.3kW charger is a high voltage canbus controlled, aircooled EV charger suitable for use with Thunderstruck/Dilithium system components. This is essentially like the Elcon 3.3kW charger.
This product not only has high efficiency, small size, high stability, long life and other advantages, but also has a wide output voltage range (110-440v) and full-featured protection features. Built-in thermal sensing gives thermal overload protection that automatically resets after cooling.
Features:
- Air Cooled
- Water resistant to IP67
- Operating temperature -35º C to + 85º C
- Weight 5 kg
- Dimensions (approx): 35cm x 14cm x 12cm
- Input Voltage AC 95~265 V
- Frequency 45-65 Hz
- Input Current 16 A
- Power Factor 0.99 at over half power
- Efficiency 94% at full power
- Idle Power 5 W
- Output Range 110-440 VDC
- Output current Limits Maximum 10 A
- Output Power 3300 W at 220 VAC or 1600 W at 110 VAC
- Voltage Accuracy ±1%
- Current Accuracy ±2%
- Ripple voltage 5%
Communication:
- CAN Baud Rate 500K
- Charger Receiving CAN ID 0x1806E5F4
- Charger Transmitting CAN ID 0x18FF50E5
- Terminating resistor: Not included
- Canbus Connections:
- CAN HI - brown wire
- CAN LO - Grey wire
Auxiliary Output:
- 12 V Power Supply (small red+ and black- wires)
- Output Voltage 12.5 V
- Current Rating 5 A
- Output Power 60 W
- HK-J-440-10 Charger with fan and heatsink