J1772 protocol is a standard for Electric Vehicle Support Equipment (EVSE) units found in public charge stations and many modern residences. This 43 mm diameter inlet connector includes a cover, internal seals, five pins and mounting hardware.
- Pins included: AC Line 1 and 2, Ground, Proximity and Pilot
- Pins are crimped and soldered to wire leading to onboard charger and charge controller
- Note alignment of parts when first disassembled
- Thread wire through required parts before soldering pins
- Tools required: #2 Phillips, Torx T10
- Rated for 40 amps
See the Charger Section for more charge system components.
Included Components