The ME709 is a stout 38 lbs and produces some 18hp peak, this radial motor can pull 125 amps at 72 volts continuously (300 amps peak) and runs in either direction. Higher torque and slower speed, this is ideally suited for 72 Volts. Works with Alltrax and other PM controllers. Good for heavier motorcycles and go-carts. Similar in performance to the ME708.
ME0709 and ME1908 are designations for the same motor.| Units | Motenergy ME0709/1908 | |
| Type | Brushed/Brushless | Brushed |
|
Cooling Type |
Air/Liquid | Air |
| Voltage | Volts | 72 |
| Peak Current (>= 30s) | Amps | 300 |
| Continuous Current | Amps | 125 |
| Max Rotor Speed | rpm | 3700 |
| Weight | lbs | 36 |
| Height (Not Including Cable Connection Points) | inches | 7.91 |
| Width | inches | 7.91 |
| Length | inches | 6.91 |
| Shaft Dimensions | Inches | 7/8"x 1-3/4", 3/16" key |
| Efficiency | % | 88 |