Liquid Cooled version of the ME1718. Approx. 150 amps continuous. 32 lbs
| Units | ME1803 (liquid cooled 1718) | |
| Type | Brushed/Brushless | Brushless |
|
Cooling Type |
Air/Liquid | Liquid Cooled |
|
Flow Rate Required |
liter/min | 4-10 |
| Voltage | Volts | 24-96 |
| Peak Current | Amps | 300 |
| Continuous Current | Amps | 150 |
| Max Rotor Speed | rpm | 5000 |
| Torque (Peak Stall Torque) | Ft Lbs | 14 (19 Nm) |
| Weight | lbs | 31.3 |
| Height (Not Including Cable Connection Points) | inches | 7.15 |
| Width | inches | 7.15 |
| Length | inches | 6.61 |
| Shaft Dimensions | Inches | 7/8 x 2-1/4 x 3/16 Key |
| Efficiency | % | 88 |
| Poles | 5 pole motor (10 magnets) | |
| Winding Resistance | mili Ohms | 5.06-5.28 |
| Inductance between phases (@1000 Hz) | micro Henry | 39-43.5 |
| Temperature Sensor Installed | Yes/No | Yes |
| Temperature Sensor PN | KTY84-130 | |
| Sensor Type | Sine-Cosine | |
| Ingress Protection | IP65 |