ME1401 Splined shaft

In stock

This motor has been used in smaller golf cart sized vehicles at 72v (rpm needs to be limited to 5000). Tested to 450 amps Peak current. Fits many standard 19 tooth splined golf cart transaxles. Get it as a kit with our Curtis controller so that we can handle the parameter settings for you. 4700 rpm @ 50v and 80 amps continuous.

  Units Motenergy ME1401
Type Brushed/Brushless Brushless

Cooling Type

Air/Liquid Air
Voltage Volts 36-96
Peak Current Amps 450
Continuous Current Amps 80
Max Rotor Speed rpm 5000
Torque (Peak Stall Torque) Ft Lbs 52 (70 Nm)
Torque Constant Nm/Amp 0.16
Weight lbs 50
Height (Not Including Cable Connection Points) inches 9
Width inches 9
Length inches 9
Shaft Dimensions Inches 7/8 x 2-1/4 x 3/16 Key
Efficiency % 88
Poles   4 pole motor (8 magnets)
Winding Resistance mili Ohms 5.06-5.28
Inductance between phases (@1000 Hz) micro Henry 39-43.5
Temperature Sensor Installed Yes/No Yes
Temperature Sensor PN   KTY84-130
Sensor Type   Sine-Cosine
Ingress Protection   IP65

Included Components