This motor has been used in smaller golf cart sized vehicles at 72v (rpm needs to be limited to 5000). Tested to 450 amps Peak current. Fits many standard 19 tooth splined golf cart transaxles. Get it as a kit with our Curtis controller so that we can handle the parameter settings for you. 4700 rpm @ 50v and 80 amps continuous.
Units | Motenergy ME1401 | |
Type | Brushed/Brushless | Brushless |
Cooling Type |
Air/Liquid | Air |
Voltage | Volts | 36-96 |
Peak Current | Amps | 450 |
Continuous Current | Amps | 80 |
Max Rotor Speed | rpm | 5000 |
Torque (Peak Stall Torque) | Ft Lbs | 52 (70 Nm) |
Torque Constant | Nm/Amp | 0.16 |
Weight | lbs | 50 |
Height (Not Including Cable Connection Points) | inches | 9 |
Width | inches | 9 |
Length | inches | 9 |
Shaft Dimensions | Inches | 7/8 x 2-1/4 x 3/16 Key |
Efficiency | % | 88 |
Poles | 5 pole motor (10 magnets) | |
Winding Resistance | mili Ohms | 5.06-5.28 |
Inductance between phases (@1000 Hz) | micro Henry | 39-43.5 |
Temperature Sensor Installed | Yes/No | Yes |
Temperature Sensor PN | KTY84-130 | |
Sensor Type | Sine-Cosine | |
Ingress Protection | IP65 |
Included Components