This is a single channel hall effect throttle with an internal idle switch. It requires a 12v DC input, provides 0-5v output for motor controllers. Mating connector provided.
Units | Foot Pedal (Hall type) | ||
Specifications
|
Input Voltage | Volts | 12 to 90 (power off below 9) |
Output Signal: 0 – 4.75 Volts DC | Volts | 0 to 4.75 | |
Switch On | Volts | 0.4 | |
Wiring Information
|
Power + Wire Color | Color | Red (Port 1) |
Output Signal Wire Color | Color | Green (Port 2) | |
Ground Wire Color | Color | Black (Port 3) | |
Switch In Wire Color | Color | Yellow (optional) (Port 4) | |
Switch Out (NO) Wire Color | Color | Blue (optional) (Port 5) |
Included Components
- Mating Connector
- Foot Pedal Throttle
No posts found