Manual locking disconnect for your traction battery, for use as maintenece disconnect switch. This switch is rated for 1000 Volts at 400 amps continus and 2000 amps for about 1 minute. See "Specifications" tab for aditional details.
| Specification | Units | Rincon 400a HVBD |
| Contact Arrangement | Form X, SPST | |
| Operating Voltage | VDC | 1,000 |
| Dielectric Withstand Voltage (1 min) | VDC | 5,000 |
| Continuous Current (107mm2 conductor) | Amps | 400 |
| Overload Current (1 minute) | Amps | 2,000 |
| Make and Break (400A @ 24VDC) | Cycles | 5,000 |
| Voltage Drop (Max at nominal load) | mV | 50 |
| Min Insulation Resistance | MOhm | 100 |
| Shock | 25G/5ms, 40G/6ms | |
| Vibration (Sinusoidal 18-500Hz Peak) | G | 20 |
| Operating Temperature | Deg C | -55 to 85 (175 max terminal temperature) |
| Ingress Protection | Exceeds IP69 | |
| Weight | Grams | 400 |
| Case Material | PA GF Black | |
| Switch Lever Material | PA GF Red | |
| Mounting | mm | 100 |
| Mounting Position | Any | |
| Auxiliary Contact Continuous Current | mA | 100 |
| Auxiliary Contact Arrangement | SPDT |