Warning Cookies are used on this site to provide the best user experience. If you continue, we assume that you agree to receive cookies from this site. OK

TC HK-J-440-10 Charger

$550.00
+

The TC HK-J series 3.3kW charger is a high voltage canbus controlled, aircooled EV charger suitable for use with Thunderstruck/Dilithium system components. This is essentially like the Elcon 3.3kW charger. Includes bare wires and connector sets. 

This product not only has high efficiency, small size, high stability, long life and other advantages, but also has a wide output voltage range (110-440v) and full-featured protection features. Built-in thermal sensing gives thermal overload protection that automatically resets after cooling. 

Features:

  • Air Cooled
  • Water resistant to IP67
  • Operating temperature -35º C to + 85º C
  • Weight 5 kg 
  • Dimensions (approx): 230 mm x 150 mm x 130 mm

Specifications:

  • Input Voltage AC 95~265 V
  • Frequency 45-65 Hz
  • Input Current 16 A
  • Power Factor 0.99 at over half power
  • Efficiency 94% at full power
  • Idle Power 5 W
  • Output Range 110-440 VDC
  • Output current Limits Maximum 10 A
  • Output Power 3300 W at 220 VAC or 1600 W at 110 VAC
  • Voltage Accuracy ±1%
  • Current Accuracy ±2%
  • Ripple voltage 5%

Communication:

  • CAN Baud Rate 250K
  • Charger Receiving CAN ID 0x1806E5F4
  • Charger Transmitting CAN ID 0x18FF50E5
  • Terminating resistor: Not included
  • Canbus Connections: 
    • CAN HI - brown wire
    • CAN LO - white wire

Auxiliary Output:

  • 12 V Power Supply (small red+ and black- wires)
  • Output Voltage 12.5 V
  • Current Rating 5 A
  • Output Power 60 W

Charger Manual (generic for model)

EVCC Charge Controller

MCU Charge and BMS Controller

Included Components

  • HK-J-440-10 Charger with fan and heatsink
  • 2 ea. Anderson SB-50 DC Output connectors and terminal pins
  • Canbus connectors and terminal pins
  • Does not include AC inlet connector - direct connection recommended