This is a handheld programmer for Dala and Curtis motor controllers.
The Dala DS13C is a programming and diagnostic tool which works with Dala controllers and many Curtis controllers. Parameter files can be saved and transferred to another controller for cloning, or saved onto a PC or SD card. The DS13C performs programming and troubleshooting tasks for vehicles using Dala and Curtis motor controllers or control systems.
OEM level programming is available on the Curtis 12xx series controllers. Curtis F series controller programming is not currently supported.
Cables for Serial (UART), Canbus, and USB C connections are included with the kit. An adapter cable for Curtis 12xx controllers sold by ThunderStruck is also provided.
*Please note that the Dala handheld programmer has a 4 pin molex connector used for connecting to your wiring harness. If your harness has a different connector for the programming port, an adapter will need to be made.*
- Dala DS13C Programmer
- Serial Cable to 4-pin Molex
- Canbus Cable to 4-pin Molex
- 4-pin to 8-pin molex adapter for Curtis 12xx Series controllers sold by ThunderStruck
- USB C to USB C cable for computer connection
- Protective Case