These controllers power the Motenergy motors with Sine/Cosine encoder. Ask us about building a complete system so you don't have to worry about making the wiring harness or programming. These controllers will not work off the shelf without motor characterization via the OEM level pc based programming software. If you are not experienced with this part of the process, please purchase an entire kit that comes ready to go, as we can't offer tech support for motor configuration.
SE/E Series Controller Availability
- 1234SE-5471 36-48v, 450 amp peak, 215 amps continuous. See full specs under the "specifications" tab.
| Specifications | Units | 1234SE-5471 |
| Nominal Voltage | Volts | 36 - 48 |
| Operating Voltage | Volts | 25.2 - 60 |
| Peak Amps (>=60sec) | Amps rms | 450 |
| Continuous Amps (60 minutes) | Amps rms | 215 |
| Operating Temperatures | Deg C | -40 to 50 |
| Power Cutback Temperature | Deg C | 85 to 95 |
| Full Cutoff Temperature | Deg C | below - 40, above 95 |
| Environmental Rating | IP65 | |
| Weight | lbs | 6.8 |
| Dimensions | L x W x H (inches) | 8.3 x 6.1 x 3.1 |
| Dimensions | L x W x H (mm) | 212 x 155 x 79 |