TSM 48v DC-DC

$150.00
TSM48DC-DC
+
Add to wish list

NEW ITEM!!!

Thunderstruck Motors 48V Isolated DC-DC converter has 13.8V output with a max of 50 amps (burst at 12V).  8"x5.5" Footprint. 3 lbs. 

Input:

Yellow 48V B+

Grey  48V B-

Green 48V B+ (On)

Output:

Red 12V +

Black 12V-

Specs:

The ipDCIS series isolated DC-DC converter utilizes advanced high frequency power conversion technology and is designed to transfer high power battery voltage to a lower 12V, to supply vehicle mounted devices such as lights and audio systems. Its features include small size, high efficiency, stabilized output voltage, and completely protected functionality.

This DC-DC converter is completely electrical isolated from input to output to ensure safe use; stabilized output voltage can charge 12V batteries; multiple DC-DC converters can be used in parallel directly to increase output current.

Maximum Efficiency:        ≥88%

Environmental Enclosure:     IP65

Operating Temperature:       -20℃-+60℃

 Protections & Functions

Water & vibration Resistant:  Enclosure is sealed by silica glue to protect from water and vibration.

Key Switch Control:       The converter can be controlled by a key switch control wire instead of an input relay.                                     

Over Heat Protection:      Automatically reduces output current if the temperature is over 65°C, but it does not shut down to

                                            ensure the continuous power for your accessories.

Short Circuit Protection:    Shuts down and auto-resets with little pulse current.

Under Voltage Protection:   Shuts down when the voltage of Hi-V battery is too low to avoid over-discharge of

                                                 the battery.

Output Voltage: 13.8V±0.2V @0A, >12V @50A

Actual Input Voltage range 36-75v

Low Voltage Cutoff 

Notes:

(1) Be sure you don't have input wires and output wires reversed, otherwise it will cause damage!

(2) Don't open the shell of the converter; there is a risk of electric shock!

Mechanical Drawing