Perm Motor PMG 132
The Perm 132 is similar in size and weight to a Briggs & Stratton Etek, but at the same Voltage it has a 50% higher peak power output, 40% higher torque constant and 120% more stall torque.
The PMG 132 is a "pancake" style, axiall gap, neutrally timed, brushed, permanent magnet DC motor manufactured by Perm Motor in Germany. It is similar in design to the Lynch/LEMCO LEM-200 and Briggs & Stratton Etek motors.
It's high power, high efficiency and small size make it a good choice for small electric vehicles, motorcycles, electrathons, generators, go-karts and robots.
Recommended controllers include the Alltrax line of controllers, from 24-72 volts.
Perm 132 .....$985
Voltage: 24-72V
Weight: 24.8lb
Brushes: 8
Speed constant: 45 rpm/V
Torque constant: 27ozf·in/A
Terminal resistance: 0.025Ohm
No-load current: 6A
Rotor Inertia: 1370oz·in²
Inductance: 19µH
Continuous current: 110A
10 minute current: 200A
Terminals: 8 mm
48 V Performance
Peak efficiency: 86%
Peak power: 15.1 hp
Cont power: 6 hp
No-load speed: 2380 rpm
Stall current: 960A
Stall torque: 133 ft-lb
72 V Performance
Peak efficiency: 88.6%
Peak power: 34.3 hp
Cont. power: 8hp
No-load speed: 3590 rpm
Stall current: 1440A
Stall torque: 200 ft-lb
Call, email, or fax us
(707)575-0353 Tel or
