Motenergy Brushless ME1306 (0913 Replacement)

$825.00
ME1306
In stock
+

This is a replacement for the ME0913 motor with an updated aluminum fan cover for better heat transfer and cooling. 

The new Dual-stator motor from Motenergy has an output power of 10.5 KW Continuous (at 48 volts), and 30 KW Peak (at 96 volts).

Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 96 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.

1) This is a 4 pole motor (8 magnets). 2) The Phase to Phase winding resistance is 0.013 Ohms. 3) The maximum recommended rotor speed is 5000 RPM. 4) Voltages from 0 to 96 VDC input to the control. 5) Torque constant of 0.15 Nm per Amp 6) The Inductance Phase to Phase is 0.20 Milli-Henry. 7) Armature Inertia is 45 Kg Cm Squared. 8) Continuous current of 125 Amps AC (180 Amps DC into the motor control). 9) Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control). 10) Weight of 35 pounds. 11) Peak Stall Torque if 90 Nm. 12) This is an Open Frame, Fan Cooled motor.

Includes temperature sensor.

Motor Compatibility Chart

ME1306 Mechanical Drawing

ME0913 Power Chart at 48v (figures are higher at higher voltages)

 

.
.

Included Components