Motenergy ME1507/1905

$1,160.00
In stock
+

The ME1507 is an Radial Air Gap, Permanent Magnet Synchronous Motor (PMSM) with an Internal Permanent Magnet Rotor (IPM). Designed for battery pack voltages of 100 VDC or less. Maximum rotor speed of 6000 rpm. Continuous current of 160 Amps RMS, and continuous power of 14.5 kw. Weight of 44 pounds. Motor speed will depend on controller type and settings. This is used with a Curtis controller in our 32kw motorcycle kits.

ME1507 and ME1905 are designations for the same motor.

 

  Units Motenergy ME1507/1905
Type Brushed/Brushless Brushless

Cooling Type

Air/Liquid Air Cooled
Voltage Volts Up to 100
Peak Current Amps 600
Continuous Current Amps 157
Max Rotor Speed rpm 6000
Torque (Peak Stall Torque) Ft Lbs 88 (120 Nm)
Torque Constant Nm/Amp 0.22
Weight lbs 44
Height (Not Including Cable Connection Points) inches 8.66
Width inches 9.84
Length inches 5.87
Shaft Dimensions Inches 1-1/8, 2-1/2, 1/4 key
Efficiency % 92
Poles   5 pole motor (10 magnets)
Inductance between phases (@1000 Hz) micro Henry 62-110
Temperature Sensor Installed Yes/No Yes
Temperature Sensor PN   KTY84-130
Sensor Type   Sine-Cosine