Chargers & Accessories

Thunderstruck provides canbus controlled chargers and controllers for 24v to 312v nominal battery packs. These systems include our EVCC and MCU as charge controllers, with which all listed canbus chargers are compatible.

Controllers, chargers and accessories are listed below. Canbus controlled chargers are noted on individual charger pages.

Charger control devices are powered by 12 volts. Verify 12v is provided before connecting to the key switch circuit. High voltage will damage the charge controller.

Charger Circuit Isolation: All TSM, TC-HK, and Lear chargers provide high impedance isolation between AC input and DC output, and between DC output and case ground. AC ground is connected to the case for protection from Power source ground faults.

$420.00
Master Control Unit (MCU) Thunderstruck's Dilithium Design Master Control Unit (MCU) is our newest offering for the DIY EV enthusiast. Combining...
In stock

$300.00
The Thunderstruck EVCC (EV charge controller) creates a user-configurable charging solution for almost any pack. If you change your battery pack...
In stock

$175.00
The Thunderstruck Basic EVCC (EV charge controller) create a user-configurable charging solution for almost any battery pack. If you change your pack...
In stock

$555.00
Systems Available from 48v to 312v Nominal This Item is the charger only , and includes all charger connectors. It requires a CAN device like the EVCC...
In stock

$505.00
This Item is the Charger Only, and does Not require an EVCC  (non-programmable). The charge profile is optimized for 150AH Lead Acid batteries but works...
In stock
+

$475.00
This 24 volt canbus enabled charger has a peak output of 40 amps, and requires an EVCC or MCU (charge controller) to function. For quicker charging,...
In stock
+

$500.00
The TC HK-J series 3.3kW charger is a high voltage canbus controlled, aircooled EV charger suitable for use with Thunderstruck/Dilithium system components....
In stock
+

$400.00 $275.00
*CLEARANCE SALE | WAS $400, NOW $275* This 3.3KW Lear charger removed from a Coda car can work at 120 or 240vac input. This liquid cooled charger is...
In stock

$350.00
This is an affordable portable EVSE for your J1772 Type 1*  Charging needs, and is capable of operating on 240 and 120 volt AC supply circuits. It handles...
In stock
+

$450.00
Car Kit includes a  Khons 32 Amp Portable EVSE and J1772 port with 6' power cable - for universal charging.
In stock
+

$50.00
This EVSE adapter allows connections between our Khons EVSE and a standard 120v outlet (USA). The adapter includes a NEMA 14-50 receptacle on one end and...
In stock
+

$90.00
This is a J1772 charge inlet port configured for Type 1 EV Supply Equipment (EVSE). J1772 is a worldwide standard for communication between vehicles...
In stock
+

$100.00
This is a J1772 power cord connector configured for  Type 1 EV Supply Equipment (EVSE) . This kit includes a 32 Amp J1772 handle with latch and female...
In stock
+

$20.00
This 5 volt USB to Serial cable is required for communicating between your PC and ThunderStruck/Dilithium devices. Allows you to customize settings, and is...
In stock
+

$35.00
J1772 ports removed from salvaged EVs. Used ports include a cut length of original wiring.
In stock
+

$150.00
DCFC removed from salvaged EVs. Used ports include a cut length of original wiring.
In stock
+

$25.00
Fuse holder for Class CC fuses in EV charging circuits.
In stock

$10.00
Anderson SB-50 Connector Housing W/Pins
In stock
+

$5.00
These are EXTRA connectors and pins for the TSM2500 and TSM1500 chargers. Typically, one of each is already included when you buy a charger.  Select the...
In stock

$20.00
2 amp charger for a 12V Lead Acid Battery. Chargers designed by "Zap" for electric bicycle charging. Specifications: 5"x2.5"x1.5" Red charge...
In stock
+

$60.00
These surplus stock Zapino 60v lead acid chargers have 5 amp output. 120vac input. New coondition. Includes AC and DC power cords.
In stock
+

$100.00
28.4v ouput, 18 amps max. Removed from vehicles, high power per dollar.
In stock
+